Inventory






FASTENER: Self-Stick Washer with Pin: 2.5in H x 2in W x 2in L. Sold separately - OR by the box upon request. |







All-round adhesive tape for Interior and Exterior use
- Adheres reliably even if moisture is present: Water-Resistant SOLID adhesive.
- Particularly durable: Adhesion for 100 years, independently tested and confirmed.
- Subsequent work can be carried out with increased flexibility: 6 months of outdoor exposure.
- Subsequent work can be started quickly: Fleece backing can be plastered over directly.
- Easy to work with: Very malleable fleece backing that can be torn by hand.
- Test winner in April 2012 with the German product-testing foundation ‘Stiftung Warentest’.
- Construction in adherence with standards: for airtight sealing in accordance with DIN 4108-7, SIA 180 and RE 2020.
- Excellent values in hazardous substance testing, has been tested according to the ISO 16000 evaluation scheme.
Temperature resistance: Permanent -40 °C to 90 °C ; -40 °F to 194 °F.
For Interior use: Airtight taping of vapour check and airtight membranes and of airtight wood-based panels.
For Exterior use: Windproofing and rainproofing of roofing underlay and breather membranes (e.g. pro clima SOLITEX) and underlay panels. Airtight taping of on-roof and refurbishment vapour check and airtight membranes.
All taped joints, indoor and outdoor, can be implemented between similar components or else with adjacent structural elements with a smooth, non-mineral surface (e.g. pipe penetrations, roof windows).
Roll Size: 60 mm x 30 m (2 3/8" x 98'5")



ROTHOBLAAS Flexi Band 100 100MMX25M 10 Rolls/Box |




















ROTHOBLAAS Thermowasher + with Cap A washer with multiple uses, but especially for fastening Insulation to Wood. THERMOWASHER can be used with wood OR metal screws, with an integrated hole cover that avoids thermal bridges. It features large, hollow spaces for proper plaster adhesion and a system that prevents the screw from pulling out. The Ø65 propylene washer is compatible with Ø6 and Ø8 screws Suitable for any type of insulation and any type of fixture thickness. With THERMOWASHER, thermal bridges are just a bad memory! 65mm x 4mm x 20mm Sizing: 2.56" x 0.157" x 13/16" |






Reinforced hydrosafe® high-performance vapour check, suitable for all fibrous insulation materials.
Air barrier, smart vapour control, and dense-pack reinforcement all in one. INTELLO Plus is the keystone to long-lasting airtightness and intelligent vapour control in walls and roofs.
- Best possible protection against moisture damage to structures and mould because this product is humidity-variable with a variation of a factor of over 100
- Can be combined with all fibrous insulation materials (including blown-in insulation)
- Permanent protection: officially tested and certified performance (ETA-18/1146)
- Protected winter building sites thanks to hydrosafe® behaviour
- Test winner in April 2012 with the German product-testing foundation ‘Stiftung Warentest’
- Easy to work with: dimensionally stable, no splitting or tear propagation
- Excellent values in hazardous substance testing, has been tested according to the ISO 16000 evaluation scheme
- Vapour Variable: Low Class II vapour retarder in winter (<0.13 Perm), protects against condensation and maximum vapour openness in summer (13.2 Perm) to facilitate rapid drying to the interior. Protects the assembly during construction high humidity periods (70% RH) with a DIN 68800-2 compliant, hydrosafe value of 1.6 perms
- Works with a wide range of insulation materials, including Gutex wood fiber and cellulose dense-pack, Havelock wool, stone wool and fiberglass. The semi-translucent material allows dense packed, blown-in insulation to be inspected after installation
- Living Building Challenge Compliant — Red List Free
- Complies with NBC part 9.36.2.9
- Complies with NBC, BC, ON code as per CAN/CGSB 51.33-M89 independent lab testing
- PHI Certified Class A Passive House Component
- Pro Clima Intelligent Airtight system (TESCON VANA tape, ROFLEX gaskets etc) allows for fast, reliable installation
- Certified to ICC-AC528-Humidity dependent Vapor Retarders - ICC ESR 4854
Areas of application
Vapour check (alternate terms: vapour control or retarder) membrane for use on roofs, walls, ceilings and floors on structures that are open or closed to diffusion on the exterior, e.g. flat/steep roofs and green roofs, after appropriate design calculations have been carried out.
|
| |
Fleece | Polypropylene | |
Functional film | Polyethylene copolymer | |
Reinforcement | Polypropylene non-woven fabric | |
Property | Regulation | Value |
Colour | White-translucent | |
Surface weight | EN 1849-2 | 110 g/m² ; 0.36 oz/ft² |
Thickness | EN 1849-2 | 0.4 mm ; 16 mils |
Water vapour resistance factor µ | EN 1931 | 35 000 |
sd value | EN 1931 | 14 m |
sd value, humidity-variable | EN ISO 12572 | 0.25 - >25 m |
g value | 70 MN·s/g | |
g value, humidity-variable | EN ISO 12572 | 1.25 - >125 MN·s/g |
Vapour permeance | ASTM E96-A | 0.23 perms |
Vapour permeance, humidity-variable | EN ISO 12572 | < 0.13 - 13 perms |
Hydrosafe value (sd) | DIN 68800-2 | 2 m |
Surface burning characteristics | ASTM E84 | Class A (Flame Spread 0; Smoke development index 35) |
Fire class | EN 13501-1 | E |
Airtightness | ASTM E2178 | ≤ 0.004 cfm/ft² |
Airtightness | EN 12114 | Tested |
Tensile strength MD/CD | EN 13859-1 (A) | 340 N/5 cm / 220 N/5 cm ; 39 lb/in / 25 lb/in |
Elongation MD/CD | EN 13859-1 (A) | 15% / 15% |
Nail tear resistance MD/CD | EN 13859-1 (B) | 200 N / 200 N ; 45 lb / 45 lb |
Durability after artificial ageing | ETA-18/1146 | Passed |
Temperature resistance | Permanent -40 °C to 80 °C ; -40 °F to 176 °F | |
Thermal conductivity | 0.04 W/(m·K) ; 0.3 BTU·in/(h·ft²·°F) | |
CE labelling | ETA-18/1146 | Yes |

