Smart Membrane Barrier
Reinforced hydrosafe® high-performance vapour check, suitable for all fibrous insulation materials.
Air barrier, smart vapour control, and dense-pack reinforcement all in one. INTELLO Plus is the keystone to long-lasting airtightness and intelligent vapour control in walls and roofs.
- Best possible protection against moisture damage to structures and mould because this product is humidity-variable with a variation of a factor of over 100
- Can be combined with all fibrous insulation materials (including blown-in insulation)
- Permanent protection: officially tested and certified performance (ETA-18/1146)
- Protected winter building sites thanks to hydrosafe® behaviour
- Test winner in April 2012 with the German product-testing foundation ‘Stiftung Warentest’
- Easy to work with: dimensionally stable, no splitting or tear propagation
- Excellent values in hazardous substance testing, has been tested according to the ISO 16000 evaluation scheme
- Vapour Variable: Low Class II vapour retarder in winter (<0.13 Perm), protects against condensation and maximum vapour openness in summer (13.2 Perm) to facilitate rapid drying to the interior. Protects the assembly during construction high humidity periods (70% RH) with a DIN 68800-2 compliant, hydrosafe value of 1.6 perms
- Works with a wide range of insulation materials, including Gutex wood fiber and cellulose dense-pack, Havelock wool, stone wool and fiberglass. The semi-translucent material allows dense packed, blown-in insulation to be inspected after installation
- Living Building Challenge Compliant — Red List Free
- Complies with NBC part 9.36.2.9
- Complies with NBC, BC, ON code as per CAN/CGSB 51.33-M89 independent lab testing
- PHI Certified Class A Passive House Component
- Pro Clima Intelligent Airtight system (TESCON VANA tape, ROFLEX gaskets etc) allows for fast, reliable installation
- Certified to ICC-AC528-Humidity dependent Vapor Retarders - ICC ESR 4854
Areas of application
Vapour check (alternate terms: vapour control or retarder) membrane for use on roofs, walls, ceilings and floors on structures that are open or closed to diffusion on the exterior, e.g. flat/steep roofs and green roofs, after appropriate design calculations have been carried out.
|
|
|
Fleece |
Polypropylene |
|
Functional film |
Polyethylene copolymer |
|
Reinforcement |
Polypropylene non-woven fabric |
|
Property |
Regulation |
Value |
Colour |
White-translucent |
|
Surface weight |
EN 1849-2 |
110 g/m² ; 0.36 oz/ft² |
Thickness |
EN 1849-2 |
0.4 mm ; 16 mils |
Water vapour resistance factor µ |
EN 1931 |
35 000 |
sd value |
EN 1931 |
14 m |
sd value, humidity-variable |
EN ISO 12572 |
0.25 - >25 m |
g value |
70 MN·s/g |
|
g value, humidity-variable |
EN ISO 12572 |
1.25 - >125 MN·s/g |
Vapour permeance |
ASTM E96-A |
0.23 perms |
Vapour permeance, humidity-variable |
EN ISO 12572 |
< 0.13 - 13 perms |
Hydrosafe value (sd) |
DIN 68800-2 |
2 m |
Surface burning characteristics |
ASTM E84 |
Class A (Flame Spread 0; Smoke development index 35) |
Fire class |
EN 13501-1 |
E |
Airtightness |
ASTM E2178 |
≤ 0.004 cfm/ft² |
Airtightness |
EN 12114 |
Tested |
Tensile strength MD/CD |
EN 13859-1 (A) |
340 N/5 cm / 220 N/5 cm ; 39 lb/in / 25 lb/in |
Elongation MD/CD |
EN 13859-1 (A) |
15% / 15% |
Nail tear resistance MD/CD |
EN 13859-1 (B) |
200 N / 200 N ; 45 lb / 45 lb |
Durability after artificial ageing |
ETA-18/1146 |
Passed |
Temperature resistance |
Permanent -40 °C to 80 °C ; -40 °F to 176 °F |
|
Thermal conductivity |
0.04 W/(m·K) ; 0.3 BTU·in/(h·ft²·°F) |
|
CE labelling |
ETA-18/1146 |
Yes |