ROTHOBLAAS Traspir 110

A Highly Breathable Membrane

The highly breathable membrane TRASPIR 110 is designed to optimize wind tightness by limiting the unconditional passage of air to protect the structure from the entry of cold draughts in winter or hot draughts in summer.
Certified by SINTEF for enhanced quality assurance and by the French CSTB in class R1, it consists of a microporous film and polypropylene protective layers. TRASPIR 110 can be applied to both the external and internal sides of walls and roofs. It is also available in a 3-metre version for even faster installation times. TRASPIR 110, the highly breathable, strong, and lightweight membrane for roof and wall installation.

TRASPIR 110 is laid parallel to the dock beam or the floor if laid on a wall. The second layer must be overlapped by at least 15 centimetres. Each layer must be fixed to the substrate with a mechanical fastener. (ex: HAMMER STAPLER, HAND STAPLER o PNEU STAPLER). It is also advisable to overlap the sheets by at least 30 centimetres at the butt joints. In order to achieve correct air and water sealing, we recommend the use of EASY BAND, SPEEDY BAND, FLEXI BAND, FLEXI BAND UV, SOLID BAND, PLASTER BAND, SMART BAND, FACADE BAND UV, FRONT BAND UV, FRONT BAND UV 210, DOUBLE BAND, SUPRA BAND, BUTYL BAND, OUTSIDE GLUE, FIRE SEALING, FIRE STRIPE or in the case of rough surfaces (such as rough OSB) FLEXI BAND, PRIMER SPAY, PRIMER .

TRASPIR 110 is placed parallel to the eaves line, starting from the lower edge of the roof. The second layer must be overlapped by at least 10-20 centimetres to the previous one (depending on the slope of the roof), as indicated on the layout according to UNI 11470:2013. The sheet must be applied on a continuous support with a mechanical fastening device. (ex: HAMMER STAPLER, HAND STAPLER o PNEU STAPLER). Once at the top of the roof, it is advisable for the membrane to protrude beyond the ridge line by at least 30 centimetres to ensure a perfect overlap with the strips of sheet that will overlap on the other side of the roof. It is also recommended that the sheets overlap by at least 30 cm even at the end joints. To achieve correct air and water sealing, we recommend the use of EASY BAND, SPEEDY BAND, FLEXI BAND, FLEXI BAND UV, SOLID BAND, PLASTER BAND, SMART BAND, FACADE BAND UV, FRONT BAND UV, FRONT BAND UV 210, DOUBLE BAND, SUPRA BAND, BUTYL BAND, OUTSIDE GLUE, FIRE SEALING, FIRE STRIPE. If there is an integrated double adhesive strip, it can replace the correct air and water sealing.

Top layer: Non-Woven PP fabric

Middle layer: PP Breathable Film

Bottom layer: Non-Woven PP Fabric

1.5M x 50M

Total square footage: 807 ft²