ThermalBuck

Brand: Thermal Buck™

Installing windows on a building with exterior insulation isn’t easy. The window and the rigid foam or mineral wool need to line up on the same plane for good drainage, proper cladding attachment, and to prevent compression of the insulation. Rough openings have always been the weakest spot on any building for air and water infiltration, and “bumping” the window out only makes it more difficult to achieve a good air and water seal.

ThermalBuck solves the challenge of installing nail flange windows & doors with exterior insulation by extending the mounting point to create a flush plane for cladding. It also insulates the rough opening, limiting thermal bridging around windows & doors.
Features
  • Extends the mounting point of windows & doors to meet the exterior insulation and/or rainscreen plane.
  • Acts as a flashing agent, creates a complete water & air barrier when mounted with recommended sealants.
  • Insulates the mounting point of windows & doors 4x more than wood window bucks.
  • Limits thermal bridging, with an R-value range of 4.4 to 17.6.
  • Prevents condensation, reduced thermal bridging means less moisture, mold and mildew.
  • Handles shear and wind loads up to 70 lbs per linear inch.
  • Sustains hurricane force winds with minimal permanent compression (compressive strength of 52 psi).
  • Allows structural attachment of windows & doors (must penetrate structure min. 1-1/4″).
  • 1/16″ integrated sill pan for good drainage.
  • Dimensionally stable and elastic. ThermalBuck won’t warp, shrink, or expand like wood window bucks. 
  • Energy-efficient, reduces the amount of natural resources needed to heat and cool year-round.
  • Improves Indoor Air Quality by preventing condensation.
  • Helps maintain the long-term operating ease of windows & doors.
  • Lightweight, flexible, durable and strong, ThermalBuck is easy to work with and install with one person.
  • Simplifies the installation of windows & doors.
  • ThermalBuck outperforms wood window bucks, and is easier to flash properly, window after window

8 models matching criteria
THERMALBUCK 2.5
Add-Ons Tremsil 400 Sausage
100+ In Stock
$57.29CAD
$35.00 Shipping
THERMALBUCK 1.0
Add-Ons Tremsil 400 Sausage
100+ In Stock
$46.90CAD
$60.00 Shipping
THERMALBUCK 3.5
Add-Ons Tremsil 400 Sausage
100+ In Stock
$66.74CAD
$35.00 Shipping
THERMALBUCK 1.5
Add-Ons Tremsil 400 Sausage
100+ In Stock
$50.76CAD
$60.00 Shipping
THERMALBUCK 3.0
Add-Ons Tremsil 400 Sausage
25+ In Stock
$59.40CAD
$35.00 Shipping
THERMALBUCK 4.0
Add-Ons Tremsil 400 Sausage
12 In Stock
$68.73CAD
$35.00 Shipping
THERMALBUCK 2.0
Add-Ons Tremsil 400 Sausage
2 In Stock
$54.18CAD
$35.00 Shipping
THERMALBUCK Thermal Tight (4x8 sheets) 1.5" show more
THERMALBUCK:THERMALBUCK Thermal Tight (4x8 sheets) 1.5"
Add-Ons Tremsil 400 Sausage
Out of Stock

Specifications

R-Value at 75° F

  • 1” = 4.4
  • 1.5” = 6.6
  • 2” = 8.8
  • 2.5” = 11
  • 3” = 13.2
  • 3.5” = 15.4
  • 4” = 17.6

R-Value at 40° F

  • 1” = 4.8
  • 1.5” = 7.2
  • 2” = 9.6
  • 2.5” = 12
  • 3” = 14.4
  • 3.5” = 16.8
  • 4” = 19.2

R-Value at 25° F

  • 1” = 5
  • 1.5” = 7.5
  • 2” = 10
  • 2.5” = 12.5
  • 3” = 15
  • 3.5” = 17.5
  • 4” = 20

Compressive Strength (ASTM C165)

  • @ 10 % Deformation
  • 52.4 psi

Design Pressure (ASTM E330/E330M)

  • +203.01 psf
  • -203.01 psf
  • < 0.5 mm (0.02”)
  • < 0.8 mm (0.03”)

Structural Pressure (ASTM E330/E330M)

  • ± 300.76 psf
  • < 0.3 mm (< 0.01”)

Water Penetration (ASTM E547)

  • 9.19 psf
  • Pass

Air Infiltration (ASTM E283)

  • 1.57 psf
  • 6.24 psf
  • < 0.01 cfm/ft²

Burn Test (ASTM E84)

  • Class A or 1 Fire Rating
  • FS< 25, SD< 450

Composition

  • Type XIV EPS with Polyurethane/polyurea Resin Coating - Contains termiticide

show more