TremGlaze S1400 Sausage
Brand: TremcoTremGlaze® S1400 is a high-performance, single-component, neutral-cure, medium-modulus silicone sealant
TremGlaze S1400 is specifically designed to achieve a watertight seal as a general perimeter caulking sealant of windows, doors and
frames, and within wood, brick, vinyl, and other residential installation substrates
Uses + Benefits:
- Medium modulus with capability to handle up to 40% expansion and contraction, making it ideal for use in dynamically moving joints.
- Extremely low VOCs and can be used in any VOC regulated area across the US and Canada.
- Primeless adhesion for most construction materials reduces installation time.
- Comes ready to use with no mixing required for immediate application with conventional caulking equipment
Substrate Preparation:
- For good adhesion, the surfaces must be sound, clean, and dry. Contact surfaces should be free of loose dirt, dust, oils, and any other contaminants
Limitations:
- Do not apply over damp or contaminated surfaces.
- Always apply sealants using adequate ventilation.
- Not intended doe continuous water immersion.
- Not intended for structural glazing/tensile bead applications.
- Do not sure in areas where movement requirements exceed +50%
Features
- Medium modulus with capability to handle up to 40% expansion and contraction, making it ideal for use in dynamically moving joints.
- Extremely low VOCs and can be used in any VOC regulated area across the US and Canada.
- Primerless adhesion for most construction materials reduces installation time.
- Comes ready to use with no mixing required for immediate application with conventional caulking equipment.
Displaying prices & availability for Ohio, United States 43201 in CAD. Change location.
Models matching criteria: 2
Out of Stock
$30.78
CAD
$15.00 Shipping
Out of Stock
$30.78
CAD
$15.00 Shipping
Specifications
Brand
Sag
- 0-0.01"
Tack Free Time
- 30 to 40 min
Tooling Time
- 10 to 15 min
Cyclic Movement
- ±40%
Elongation
- 210 to 235%
Hardness (Shore A)
- 30 ±5
Peel Strength: Aluminum & Glass
- 15 to 20 pli (2.63 to 3.51 kN/M)
Tensile Strength at Max Elongation
- 180 to 200 psi (1.24 to 1.38 MPa)