DELTA®-MS Below-Grade Dimpled Membrane

Brand: Delta®

DELTA®-MS is manufactured with an exclusive co-extrusion process, utilizing 60% recycled high density polyethylene (HDPE) from municipal recycling programs in the middle, and two thin layers of a special virgin HDPE on the outside. The encapsulation of the recycled HDPE ensures that DELTA®-MS is protected against degradation caused by oxidation and environmental influences, like acidic soils or alkalinity (concrete).

DELTA®-MS, equipped with highly effective additive packages, provides high compressive strength, impact resistance, and chemical and environmental stress crack resistance.

DELTA®-MS is a dimpled membrane, impermeable to water and water vapor. The dimple pattern creates an air-gap between the membrane and the foundation wall. This allows any incidental water getting past the dimpled membrane to flow freely to the perimeter footing drain. The air-gap provides a safe separation and full capillary break between the foundation wall and any ground moisture.

DELTA®-MS bridges large cracks and imperfections in foundation walls. It can also be utilized as an effective protection layer over spray or sheet applied waterproofing systems. DELTA®-MS is available in many sizes to cover any foundation with a minimum of overlaps and seams. The high compressive strength of the membrane ensures sustainable protection of foundation walls up to 12 ft below grade.
Features
  • Impermeable to water and water vapor, keeping basements dry
  • Meets all building code requirements in the USA and Canada
  • Two lines of defense against water intrusion: dimpled membrane provides capillary break; air-gap allows incidental water to freely drain by gravity
  • Eliminates interior dampness and musty odors
  • Reliably bridges foundation cracks and deflects soil moisture, unlike asphaltic sprays
  • Continues to function even if foundation shifts or cracks
  • No unpleasant chemical odors or harmful VOCs
  • Resists damage from backfill, like rocks and debris
  • Installs in all types of weather
  • Declare Label: Red List Free

5 models matching criteria
DE013MS-6
DELTA Membrane System 6' x 65' 7"
Available Add-Ons:DELTA Termination Bar, DELTA Mold Strip, DELTA Grip Fastener
11 In Stock
$188.40CAD
$30.00 Shipping
DE013MS-7
DELTA Membrane System 7' x 65' 7"
Available Add-Ons:DELTA Termination Bar, DELTA Mold Strip, DELTA Grip Fastener
11 In Stock
$219.48CAD
$30.00 Shipping
DE013MS-8
DELTA Membrane System 8' x 65' 7"
Available Add-Ons:DELTA Termination Bar, DELTA Mold Strip, DELTA Grip Fastener
11 In Stock
$252.00CAD
$30.00 Shipping
DE013MS-5
DELTA Membrane System 5' x 65' 7"
Available Add-Ons:DELTA Termination Bar, DELTA Mold Strip, DELTA Grip Fastener
Out of Stock
$156.84CAD
$30.00 Shipping
DE013MS-67
DELTA Membrane System 6'7"' x 65' 7"
Available Add-Ons:DELTA Termination Bar, DELTA Mold Strip, DELTA Grip Fastener
Out of Stock
$205.61CAD
$30.00 Shipping

Specifications

Brand

Color

  • Chocolate Brown

Material of Construction

  • Recycled High-density Polyethylene, Encapsulated Between Two Layers of Special Virgin HDPE

Dimple Height

  • 5/16" (8 mm)

Compressive Strength

  • Approximately 5,200 psf (250 kN/m²)

Flow Rate / Unit Width @ Hydr. Grad. 1, 100 kPa

  • 10.6 gal/min/ft (132 L/min/m)

Flow Rate / Unit Width @ Hydr. Grad. 0.1, 100 kPa

  • 3 gal/min/ft (37.5 L/min/m)

Air-Gap Volume Between Dimples

  • Approximately 0.13 gal/ft² (5.3 l/m²)

Water Penetration Resistance

  • > 120 psi (815 kPa) Watertight

Water Vapor Transmission

  • < 22 ng/(Pa s m²)

Vapor Permeance

  • < 0.3 perms [grains/h/ft²/in Hg]

Temperature Range

  • -22° to 176° F (-30° to 80° C)

Roll Length

  • 65’ 7" (20 m)

Roll Width / Weight

  • 8’ (2.45 m) 63 Lbs (28.6 kg)
  • 7’ (2.13 m) 55 Lbs (24.9 kg)
  • 6’ 7" (2.00 m) 51 Lbs (23.1 kg)
  • 6’ (1.83 m) 47 Lbs (21.3 kg)
  • 5’ (1.52 m) 41 Lbs (18.6 kg)
  • 3’ 6" (1.07 m) 28 Lbs (12.7 kg)
  • 9’ 10" (3.00 m) 77 Lbs (34.9 kg)

Service Life Expectancy

  • > 25 Years (At pH Between 4 and 9, and Temperature Below 77° F / 25° C). Do not Expose to UV Light for More Than 30 Days

DELTA®-MS is installed by unrolling the membrane against the foundation wall. DELTA® Accessories allow for quick and effective fastening of the membrane. The top edge of the product is sealed and protected against intrusion of soil particles and surface water with sealant and specifically designed profiles and fasteners.

Documentation

Show More